An Effective Solution For Data Center Cabling

With the rapid development of data center, its cabling systems tend  to be more complex and series of problems also happens with it, such as high density cabling, higher power consumption and so on. It’s obviously unwise and uneconomical to build/expand a new location to solve these problems. However, how to deal with them? Now, this article introduces an effective solution to us—Direct Attach Cables.

Direct attach cable

Direct attach cable, DAC for short, is a form of high speed cable with optical transceivers on either end. They can be used to connect switches to routers or servers and be usually used in data center for short-distance transmission between racks.

Generally, according to the construction differences, the DAC comes in two types: passive DAC and active DAC.

Passive DAC are suitable for short distances up to 10 m, while  active DAC has a little longer transmission distance up to 15m at 10Gbps or 40Gbps, because it has an active component to transmit/receive signal. Passive DAC requires no power for internal electronics, which avoids consuming power or producing heat. While active DAC comes in reverse, it needs power to make its internal circuits work properly.

When it comes to the reason why DAC is introduced into data centers, it involves in two factors showing its superiorities.

For one thing, DAC has the potential to reduce the overall power consumption and heat dissipation, which help network operators save cost. We all know that denser equipment in the data center or server rooms will consume more electrical power and produce more heat, which means more cooling systems are required. While DAC is able to make it.

For another thing, DAC do not need patch panels or additional cables when connected to devices, as is the case with an optical module. The modules on both ends make them sturdy and reliable as well as space-saving.

In addition, DAC is cheaper than the regular optics. Because the “transceivers” on both ends of DACs are not real optics. Compared with the regular optics, they are without the real components and just used to transmit the optical signals. And of course, without those expensive optics components, the cost of DACs is much lower. Thus, though using the same port as an optical transceiver, DACs are cost-savings and power-saving in short reach applications.

Meanwhile, in today’s markets, in order to satisfy the growing needs for cost-effective delivery of more bandwidth, there are mainly three kinds of DAC according to the transmission rate: 10G SFP+ DAC, 40G QSFP+ DAC and 100G QSFP28 DAC.

10G SFP+ DAC offers the high density, low cost and low power solutions for today’s 10G Gigabit Ethernet connections. With its SFP+ interface, this twinax cable allows interconnects with hot-pluggable optical transceivers and Ethernet switches in data centers.

40G QSFP+ DAC offers a way for 40G Gigabit short distance connections between QSFP ports switches. As its name shows, 40G QSFP+ DAC has QSFP+ connectors on both ends. And it uses integrated duplex serial data links for bidirectional communication. 40G QSFP+ DAC is a little different from 10G SFP+ DAC. Because it has another two breakout forms: 40G QSFP+ to 4XSFP+ DAC and 40G QSFP+ to 4xXFP DAC. These breakout DACs can be used to migrate from 10G to 40G.

The 100G QSFP28 DACs are high speed cable to meet and exceed 100G Gigabit Ethernet, providing connectivity between devices using QSFP28 ports. The 100G QSFP28 DAC includes QSFP28 to QSFP28 and QSFP28 to 4xSFP28 breakout DAC. These interconnect cables provide four channels of high speed differential signals with data rates ranging from 25Gbps up to potentially 40Gbps.

Above all is about DAC. It seems that it provides a low power consumption and high-speed solution for data center interconnections. If you want to know more information about it, welcome to contact us!

About us: We are a sub-brand of Gigalight, we focus on high-end optical network devices, mainly supplying industrial-grade optical transceivers and professional optical interconnection components for data centers. With more than 10 years' experience in optics industry, we now have professional R&D team(more than 100 engineers) and stable supply ability.